Codan Envoy

    Codan Envoy - Front viewCodan Envoy - Base station configuration
Type
Mobile Commercial HF Transceiver 
Frequency range RX
0.250-30 MHz 
TX
1.6-30 MHz 
Frequency stability
±0.3 p.p.m. from –30°C to +60°C 
Tuning steps
Filters
2.4 kHz standard (500 Hz, 2.7 kHz optional) 
Receiver
Modulations
AM / CW / USB / LSB / FSK / AFSK 
Sensitivity
0.12 µV, –125 dBm for 10 dB SINAD 
Selectivity
>70 dB at –1 kHz and +4 kHz ref SCF USB 
Receiver system
SDR Processing Architecture:
DSP, 456 MHz, 32-bit
FPGA, 500,000 gate
MCU, ARM9, 300 MHz 32-bit 
IF-frequencies
Image rejection
>70 dB 
Audio output
Less than 3 dB variation from 300 Hz to 3 kHz (with optional 2.7 kHz filter) 
Transmitter
Modulations
AM / CW / USB / LSB / FSK / AFSK 
RF-output
125 W PEP ±1 dB (two-tone or voice), user-programmable (low / medium / high) 
Connections
Antenna
SO-239 
Impedance
50Ω 
Electrical
Power requirements
10.8 to 15 V DC (12 V Nominal) 
Current drain RX
500 mA (backlight min, audio muted) 
TX
12.5 A max 
Physical
Dimensions (w×h×d)
210 × 270 × 65 mm (8.27 × 10.63 × 2.56 in) RF-unit 
Weight
3.1 kg (6.8 lbs) RF-unit + handset 
Form factor
Mobile 
Manufactured
Between 201x and 20xx in Australia 
Other features
Memories
1000 channels in 20 banks  
Usage
Commercial / Land mobile communication 
Manufacturer
Codan 
Model
Envoy
Features
Up to 500 contact list entries
USB (via Handset or Console)
Serial RS232 (supports NMEA-0183 GPS)
Ethernet (TCP/IP, supports remote control)
Auxiliary GPIO (audio in/out, PTT, RS232) on Envoy™ X2 model
Ingress Protection: IP43, MIL-STD-810G method 510.5 
Manuals, Diagrams and Brochures
 
None available  

Price History

Estimating the value of a rig, especially an old one, can be challenging. The graph below displays what others have paid for this rig over the years. May it guide you to good fortune...

Reviews

There are currently no reviews for this rig