Hammarlund HQ-180A
(0.0/5)
Add a review /
View all reviews
The Hammarlund HQ-180A general coverage receiver tunes from 540 to 30000 kHz in six ranges: .54-1.05, 1.05-2.05, 2.05-4.04, 4-7.85, 7.85-15.35 and 15.35-30 MHz. The amateur bands are all bandspread: 3.44-4.04, 6.81-7.3, 13.98-14.425, 20.925-21.6 and 27.89-29.7 MHz. Following on the success of the original HQ-180, the HQ-180A adds: improved mechanical and electrical stability, tunable BFO for CW or fixed BFO for optimum SSB, silicon rectifiers, accessory power supply and 115/230 VAC 50/60 Hz operation. Other enhancements include: antenna trimmer, noise limiter, RF gain, S-meter, stand-by and AVC on/off. This radio does not have a built-in speaker. There are 3.2 ohm speaker terminals on the rear panel. The suggested optional speaker is the S-200
Type- Desktop Amateur HF Receiver
- Frequency range RX
- 0.54-30 MHz
- TX
- -
- Frequency stability
- -
- Tuning steps
- -
- Filters
- -
Modulations- AM / CW / SSB
- Sensitivity
- -
- Selectivity
- -
- Receiver system
- -
- IF-frequencies
- -
- Image rejection
- -
- Audio output
- -
- Antenna
- SO-239 + Klemmen / schroeven
- Impedance
- 50 Ω
- Power requirements
- Mains
- Current drain RX
- 120W
- TX
- -
- Dimensions (w×h×d)
- 483 × 267 × 330 mm (19.02 × 10.51 × 12.99 in)
- Weight
- 17.25 kg (38.1 lbs)
- Form factor
- Desktop
- Manufactured
- Between 1959 and 1962 in USA
- None available
Hammarlund HQ-180A's price
Estimating the value of a rig can be challenging. The graph below shows historical prices paid by hams over the years. May it guide you to good fortune...
|
|
|
|
|
|
Own(ed) this rig?
Contribute to the Price History database by adding this rig to your collection! |
|
Videos
View more videos about the Hammarlund HQ-180A on YouTube

