ICOM IC-751
(3.8/5)
Add a review /
read all reviews
The ICOM IC-751 is an advanced transceiver covering 160 to 10 meters. It features a high performance 100 kHz to 30 MHz general coverage receiver built in. Output is 10 to 100 watts SSB/CW/RTTY modes (10 to 40 watts AM). The IC-751 has sophisticated capabilities such as: dual digital VFOs, all-mode squelch, Notch, Passband Tuning, RIT/XIT, pre-amp and attenuator. You also get 32 memories. The two color flourescent digital display is easy to read. There is a multi-function meter. Serious CW operators will appreciate the full and semi break-in capability. The IC-751 has a high quality FL-44A 500 Hz SSB filter. The rear panel has an SO-239 antenna jack plus a receive only RCA phono jack. This radio comes with the HM-12 hand mic.
The IC-751 has a battery-backed BIOS-RAM. There is a special procedure to replace the battery. If the procedure is not followed the radio might not survive!
Type- Desktop Amateur HF Transceiver
- Frequency range RX
- 10-160 m + WARC
- TX
- 10-160 m + WARC
- Frequency stability
- -
- Tuning steps
- -
- Filters
- -
Modulations- AM / FM / CW / USB / LSB / RTTY
- Sensitivity
- -
- Selectivity
- -
- Receiver system
- -
- IF-frequencies
- -
- Image rejection
- -
- Audio output
- -
- Antenna
- SO-239
- Impedance
- 50 Ω
- Power requirements
- 13.8V DC
- Current drain RX
- -
- TX
- 20 A max
- Dimensions (w×h×d)
- 306 × 115 × 349 mm (12.05 × 4.53 × 13.74 in)
- Weight
- -
- Form factor
- Desktop
- Manufactured
- Between 1983 and 19xx
- Memories
- 32 channels in 1 banks
Usage- Amateur / Ham radio operators
- Manufacturer
- ICOM
- Model
- IC-751
- Features
What's it worth?
Estimating the value of a rig, especially an old one, can be challenging. The graph below displays what others have paid for this rig over the years. May it guide you to good fortune...
|
|
|
|
|
|
Own(ed) this rig?
Contribute to the Price History database by adding this rig to your collection! |
|
Videos
View more videos about the ICOM IC-751 on YouTube.

