Yaesu FTdx3000
- Type
- Desktop Amateur HF/VHF Transceiver
- Frequency range RX
- 0.03-56 MHz
- TX
- 1.8-54 MHz (amateur bands only)
- Frequency stability
- ±0.5 p.p.m. (after 1 minute @+14 °F to +122 °F [–10 °C to +50 °C])
- Tuning steps
- AM/CW/SSB: 1/10 Hz, FM: 0.1 kHz
- Filters
- -
Receiver
- Modulations
- AM / FM / CW / USB / LSB / RTTY
- Sensitivity
- SSB (BW: 2.4 kHz, 10 dB S+N/N)
4 µV (0.5 - 1.8 MHz) (IPO “ON”)
0.16 µV (1.8 - 30 MHz) (RF AMP 2 “ON”)
0.125 µV (50 - 54 MHz) (RF AMP 2 “ON”)
AM (BW: 6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
28 µV (0.5 - 1.8 MHz) (IPO “ON”)
2 µV (1.8 - 30 MHz) (RF AMP 2 “ON”)
1 µV (50 - 54 MHz) (RF AMP 2 “ON”)
FM (BW: 15 kHz, 12 dB SINAD)
0.5 µV (28 - 30 MHz) (RF AMP 2 “ON”)
0.35 µV (50 - 54 MHz) (RF AMP 2 “ON”) - Selectivity
- CW/RTTY/PKT 0.5 kHz or better 750 Hz or less
SSB 2.4 kHz or better 3.6 kHz or less
AM 6 kHz or better 15 kHz or less
FM 15 kHz or better 25 kHz or less - Receiver system
- Double conversion
- IF-frequencies
- 1st: Main: 9 MHz
2nd: Main: 30 kHz (SSB/CW), 24 kHz (FM/AM) - Image rejection
- HF: ≥ 70 dB
6m: ≥ 60 dB - Audio output
- 2.5 W into 4 Ohms with 10% THD
Transmitter
- Modulations
- AM / FM / CW / USB / LSB / RTTY
- RF-output
- 5-100 W (AM: 2-25 W)
Connections
- Antenna
- SO-239
- Impedance
- 50 (16.7-150 depending on band)Ω
Electrical
- Power requirements
- 13.8 V DC ± 10% (Negative Ground)
- Current drain RX
- 1.8-2.1 A
- TX
- 23 A
Physical
- Dimensions (w×h×d)
- 365 × 115 × 312 mm (14.37 × 4.53 × 12.28 in)
- Weight
- 10 kg (22.1 lbs)
- Form factor
- Desktop
- Manufactured
- Between 2012 and 20xx in Japan
Other features
- Memories
- -
- Usage
- Amateur / Ham radio operators
- Manufacturer
- Yaesu
- Model
- FTdx3000
- Features
- Hi-perf crystal roofing filters
3.5 inch TFT screen
High speed spectrum scope
32-bit IF-DSP
9 MHz IF output
Built-in auto-ATU
USB, CAT and µ-tune ports
3 × SO-239 connectors
Manuals, Diagrams and Brochures
- None available