Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | ? | 2m 70cm | |
| Freq. stability | 6 ppm (-10C to +60C) | ± 1.0 ppm (+25°C) | |
| Tuning steps | 5 / 6.25 / 8.33* / 9* / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 kHz | 5 / 6.25 / 8.33* / 9* / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 125 / 250 kHz | |
Receiver |
|||
| RX-range | 0.150-1310 MHz (cellular blocked in USA; some ranges blocked in France) |
0.1–824 / 851–867 / 896–1310 (USA) 0.1–30 / 50.2–51.2 / 87.5–108 / 144–146 / 430–440 / 1240–1300 (France) 0.1–1310 MHz (Other regions) |
|
| Modulations | AM FM W-FM | AM FM W-FM | |
| Sensitivity | ? |
FM (1 kHz/3.5 kHz Dev.; 12 dB SINAD) 1.625–4.995 MHz 0.32 μV typical 5.000–29.995 MHz 0.25 μV typical 30.000–117.995 MHz 0.18 μV typical 118.000–246.995 MHz 0.18 μV typical 247.000–469.995 MHz 0.18 μV typical 470.000–832.995 MHz 0.32 μV typical 833.000–1029.995 MHz 0.28 μV typical 1030.000–1309.995 MHz 0.35 μV typical W-FM (1 kHz/52.5 kHz Dev.; 12 dB SINAD) 76.000–108.000 MHz 1.1 μV typical 175.000–221.995 MHz 1.1 μV typical 470.000–770.000 MHz 1.8 μV typical AM (1 kHz/30% MOD.; 10 dB S/N) 0.495–4.995 MHz 1.3 μV typical 5.000–29.995 MHz 0.89 μV typical 118.000–136.000 MHz 0.63 μV typical 222.000–246.995 MHz 0.63 μV typical 247.000–329.995 MHz 0.79 μV typical |
|
| Selectivity | ? |
AM/FM More than 12 kHz/–9 dB Less than 30 kHz/–60 dB W-FM More than 150 kHz/–6 dB |
|
| Filters | ? | ? | |
| Receiver system | Triple conversion superheterodyne | Triple conversion superheterodyne | |
| IF-freqs. |
1st: 266.7 MHz 2nd: 19.65 MHz 3rd: 450 kHz |
1st: 266.7 MHz 2nd: 19.65 MHz (FM/AM), 19.95 MHz (W-FM) 3rd: 450 kHz (FM/AM), 750 kHz (W-FM) |
|
| Image rejection | ? | ? | |
| Audio output | 100mW at 10% distortion, 8 ohms | 150mW at 10% distortion, 8 ohms | |
Transmitter |
|||
| TX-range | - | - | |
| Modulations | - | - | |
| RF-output | ? | ? | |
Connections |
|||
| Antenna | SMA | SMA + Built-in ferrite bar | |
| Impedance | 50 Ω | 50Ω | |
| Other | - | - | |
Electrical |
|||
| Power req. | 2.4-3V DC (2R6/AA) or max 6V DC (5%) external | 4.5-6.3V DC or 2 R6/AA | |
| Current RX | 41 mA (standby), 120 mA (typical), 170 mA (max) | 30 mA (standby), 130 mA (typical), 140 mA (max) | |
| TX | - | - | |
Physical |
|||
| Manufactured | Between 2002 and 200x in Japan | Between 2010 and 201x in Japan | |
| Dimensions |
58 × 86 × 27 mm (2.28 × 3.39 × 1.06 in) |
58 × 86 × 29.8 mm (2.28 × 3.39 × 1.17 in) |
|
| Weight | 185 gr (6.5 oz) | 200 gr (7.1 oz) (with supplied antenna and batteries) | |
| Form factor | Handheld | Handheld | |
Other features |
|||
| Memories | 1250 channels in 1 bank(s) @ 15 channels/second | 1550 channels in 1 bank(s) @ 100 channels/second | |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | |
| Features |
CTCSS & DTCS PC-programmable via USB Data-cloning Build-in battery charger Rotary frequency dial Ferrite bar antenna for MW Frequency shift for duplex transmissions |
CTCSS & DTCS PC-programmable via USB Data-cloning Build-in battery charger Rotary frequency dial Ferrite bar antenna for MW Frequency shift for duplex transmissions |
|
| Accessories | ? | ? | |
| MPN | ICOM-IC-R000005 | ICOM-IC-R000006 | |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee