Yaesu FRG-7

(0.0/5) Add a review / View all reviews

The Yaesu FRG-7 is an all mode receiver covering 200 kHz to 29.90 MHz in four bands. Modes of reception include AM, USB and LSB/CW. The display is linear analog providing up to ±5 kHz dial accuracy. Features include: RF Attenuator, Preselector, Fine Tuning [later production], Tone Control and ANL. There is a carry handle on the right side. The rear panel has high and low impedance antenna inputs. The FRG-7 operates from 120 VAC, 13 VDC or 8 D cells that plug in the battery pack that is accessible via the rear panel.

Early versions did not feature the fine tuning knob.

Type

Desktop Amateur HF Receiver 

Frequency range RX

0.2-30 MHz in four bands 

TX

- 

Frequency stability

±500Hz per 30 minutes afater warm-up 

Tuning steps

- 

Filters

- 

Modulations

AM / CW / USB / LSB 

Sensitivity

AM: <2 µV (10 dB S/N)
SSB/CW: <0.7 µV (10 dB S/N) 

Selectivity

±3 kHz (-6 dB), ±7 kHz (-50 dB) 

Receiver system

Triple conversion superheterodyne 

IF-frequencies

1st: 54.6-55.5 MHz
2nd: 2.1-3 MHz
3rd: 455 KHz 

Image rejection

- 

Audio output

2W @ 8 Ohms 

Modulations

- 

RF-output

- 

Antenna

SO-239 + Klemmen / schroeven 

Impedance

50Ω 

Power requirements

13.8V DC or mains + battery option 

Current drain RX

- 

TX

- 

Dimensions (w×h×d)

340 × 153 × 285 mm (13.39 × 6.02 × 11.22 in)  

Weight

7 kg (15.4 lbs)  

Form factor

Desktop 

Manufactured

Between 1976 and 1980 in Japan 

Memories

- 

Usage

Amateur / Ham radio operators 

Manufacturer

Yaesu 

Model

FRG-7

Features

 

 

None available  

 

View more manuals and documents
Can you supply additional photos or documents? Please contact us!

 

Have you spotted an error? Report it...