ICOM IC-735 Desktop Shortwave Transceiver

  Add a review   View all reviews (3)   Add to my shack

 
 

Frequency range

RX-range
0.1-30 MHz
TX-range
10-160 m + WARC
HAM bands
-
Stability
-
Tuning steps
-
Filters
-

Find the ICOM IC-735 on ebay

Receiver

Modulations
AM   FM   CW   SSB  
Sensitivity
-
Selectivity
-
Receiver system
-
IF-frequencies
-
Image rejection
-
Audio output
-

Transmitter

Modulations
AM   FM   CW   SSB  
RF-Output
10-100 W (AM 10-40 W)

Connections

Antenna
SO-239
Impedance
50 Ω

Electrical

Power requirements
13.8V DC
Current drain RX
1.2-1.5 A
TX
Max 20 A

Physical

Dimensions (w×h×d)
241 × 94 × 272 mm (9.49 × 3.70 × 10.71 in)
Weight
5.00 kg (11.0 lbs)
Form factor
Base Station
Manufactured
Between 1985 and 198x in Japan

Other features

Memories
-
Usage
Amateur / Ham radio operators
Features + options
-
Accessories
-

Manuals, diagrams and brochures

No documents available for this rig

Can you supply additional documents? Please get in touch!
Show more ICOM documents...

Have you spotted an error or can you provide more information? Let us know!

Reviews

Excellent Rig Built to Last

ICOM IC-735, Desktop Shortwave Transceiver

Bought my IC-735 used and I have owned it since 2007. This radio is a little different in design in that it has a small smoke colored plastic "door" on it's face that covers lesser used controls such as mic and rf gain. It has AM /FM /CW /SSB operation modes and FM operation is one that a lot of the newer rigs don't have today. Unfortunately, there is no inboard DSP, but coupled with a W9GR DSP III it has been a superb CW rig. Overall this is one of Icom's workhorse HF radios. It is built solid and has exceptional receive audio for a non-DSP radio, transmit audio is very loud and steady, and the VOX control allows use with most headset or boom mikes. The radio works well on the new digital modes with the 8 pin din ACC jack. Conversion to 60m transmit is easy but does require removal of the PA unit. Overall I love this rig, but it does have some drawbacks. First on the back of the radio Icom uses a RCA jumper cable to achieve audio input from the main board. Over time the RCA jacks can come loose from the circuit board if the jumper is bent or frequently removed. Second, Icom used PLASTIC carrier reference and VCO trimmer caps. THESE WILL FAIL! They are easily replaced by CERAMIC trimmer caps if you are technically skilled at soldering, otherwise it requires sending the radio off to Icom for repair. Third, the power switch is prone to failure. It is a special switch made by Icom and is expensive to replace. Last, as with all radios built in the late 1980's to mid 1990's Icom no longer carries parts for these radios, so a parts rig would be helpful if something goes bad. I have had to replace the trimmer caps, repair the RCA jacks and power switch, do a complete realignment of the radio, and replace the face plate. So after all the repair work, my rig is like new and should last me a life time. These are good rigs for the money and usually go for about $400 on the used market.

Written by KA9OFM on Jun 5, 2012

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Good condition in 2007
USD 300.00

Brilliant Transceiver

ICOM IC-735, Desktop Shortwave Transceiver

From the right age. No fancy useless gimmicks.Straightforward , well built, easy to use Transceiver.Excellent transmitted Audio reports.A real pleasure to use.

Written by GW1MCD on Jun 8, 2012

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Good condition in 2012
GBP 250.00

Favorite back-up rig

ICOM IC-735, Desktop Shortwave Transceiver

Had this rig for about 2 years as of Jul 2013. Good quality transmit and receive. Has some useful features but not many bells and whistles like rigs of today. I prefer the simpler rigs and this rig fits that bill. My primary rig is a Yaesu FT-840. Although very similar to the IC-735 in features, the FT-840 has a slightly better receive quality. The memory battery in the IC-735 is challenging to change.

Written by NH6RF on Jul 12, 2013

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Good condition in 2011
USD 300.00

Prices

Estimating the value of a rig can be challenging. The graph below shows historical prices paid by hams over the years. May it guide you to good fortune...

Price Condition Year User
USD 900.00 Mint / New 1988 K1VI
USD 300.00 Good / Used 2007 KA9OFM
GBP 250.00 Good / Used 2009 GW1MCD
USD 400.00 Good / Used 2011 N9SJA
USD 300.00 Good / Used 2011 NH6RF
USD 300.00 Okay / Used 2015 k6avi
To submit a price, either review the rig or add it to your shack.