Ten-Tec 2591 Handheld VHF Transceiver

 (3.8/5)  Add a review   View all reviews (1)   Add to my shack

 
 

Frequency range

RX-range
143.5-149 MHz
TX-range
143.5-149 MHz
HAM bands
-
Stability
-
Tuning steps
5, 10, 15, 25, or 30 kHz
Filters
-

Find the Ten-Tec 2591 on ebay

Receiver

Modulations
FM  
Sensitivity
Better than .5 µV for 20 dB quieting
Squelch: Less than .4 µV
Selectivity
More than +/- 7.5 kHz at -6 dB
Less than +/- 15 kHz at -60 dB
Receiver system
Double Conversion SuperHeterodyne
IF-frequencies
1st: 10.7 MHz
2nd: 455 kHz
Image rejection
-
Audio output
325 mW at 8 ohms

Transmitter

Modulations
FM  
RF-Output
High: 2.5 W, Low: 0.3 W

Connections

Antenna
BNC
Impedance
50 Ω

Electrical

Power requirements
8.4V DC NiCd
Current drain RX
25-180 mA
TX
750-375 mA

Physical

Dimensions (w×h×d)
169 × 66 × 41 mm (6.65 × 2.60 × 1.61 in) with battery pack
Weight
496 gr (1.1 lbs) with battery pack
Form factor
Handheld
Manufactured
Between 1983 and 198x

Other features

Memories
10 channels in 1 bank(s)
Usage
Amateur / Ham radio operators
Features + options
Memory Lock out
Selectable Skip (stop 2 sec before resuming scan) or Hold (stop and hold) on busy frequency
Modifiable Band Scan
Selectable Power Level (300mW / 2.5 W)
Quick-Release Battery Pack
Accessories
-

Manuals, diagrams and brochures

No documents available for this rig
 
Upload documents or show all Ten-Tec documents
 
Have you spotted an error or can you provide more information? Let us know!

Reviews

Ten-Tec 2591 HT + Accessories

Ten-Tec 2591, Handheld VHF Transceiver

I purchased the Ten-Tec 2591 HT on 3/10/1986 from Alaska Electronics Supply, Inc in Anchorage, Alaska. The TT 2591 is supplied with a TT 2991 NiCad 8.4 vdc 450 mAH BP & 14 Hr wall-wart charger, Rubber Duct antenna, Ten-Tec Owner's Manual & Full Page color brochure. Purchase Price $319. In addition to TT supplied accessories I purchased the following TT accessories directly from Ten-Tec along the way: TT 2700 Speaker / Mic for TT 2591 HT TT 2992 5 hour Desk Charger for TT 2991 BP TT 2993 12 VDC Adapter Pack with cigarette lighter plug TT 2990 9 VDC (6 AA) Battery Pack - Preserves memory when storing HT This HT is still in service at my station with no issues - 29 years and counting. Over the years I have used all of the listed accessories as needed and all have functioned as advertised and still do. Current configuration is for nostalgia: Heathkit HP-1175 , TT 2993, TT 2591 HT with TT 2700 Speaker / Mic, Mirage HT 35 watt 2m amp, Heathkit HM 2141 VHF SWR / PWR Meter, Diamond X50A antenna. Received audio is excellent, audio on the other end is very good per comments from those I QSO with. PRO's : Reliable, Excellent Audio, Many Accessories, Extended Freq Cov. CON's : Xmit PWR (Low 300 MW - High 2.5 W),10 Memories, Excessive Battery Drain. Regrets: I did not purchase the TT 2201 Sub-Audible Tone Encoder * or the TT 2425 30 watt Power Amplifier when they were available. Technology has rendered this Gem obsolete, but for repeater use if one has installed the TT 2201 Sub-Audible Tone Encoder there are no limits to normal chit chat. Many repeaters in my area do not use tone access in this day of Great Technology i.e.Mt. Mitchell 145.190 minus 600 no tone.- Six to Seven state access, at over 6,600 ft. AL7GF

Written by AL7GF on Jan 3, 2016

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Mint condition in 1986
USD 0.00

Prices

Estimating the value of a rig can be challenging. The graph below shows historical prices paid by hams over the years. May it guide you to good fortune...

Price Condition Year User
To submit a price, either review the rig or add it to your shack.