Hy-Gain 9 (2679) Mobile Transceiver

 (2.6/5)  Add a review   View all reviews (1)   Add to my shack

 
 

The Hy-Gain 9 originally came with 23 channels. A 40 channel unit was available. The PCB was made by Cybernet Enterprise in Japan.

Frequency range

RX-range
26.965-27.255 MHz
TX-range
26.965-27.255 MHz
HAM bands
11m (CB) 
Stability
-
Tuning steps
-
Filters
455 kHz

Find the Hy-Gain 9 (2679) on ebay

Receiver

Modulations
AM  
Sensitivity
0.7 µV for 10 dB (S+N)/N
Selectivity
-
Receiver system
Dual conversion superheterodyne with RF-amplifier stage and 455 kHz ceramic filter
IF-frequencies
1st: 10.695 MHz
2nd: 455 kHz
Image rejection
-
Audio output
3 W max

Transmitter

Modulations
AM  
RF-Output
4 W max

Connections

Antenna
SO-239
Impedance
50Ω

Electrical

Power requirements
11.5~14.5 V DC, negative or positive ground
Current drain RX
500 mA in standby (no signal)
TX
1.3 A @ 13.8 V DC unmodulated

Physical

Dimensions (w×h×d)
-
Weight
-
Form factor
Mobile
Manufactured
Between 1976 and 197x in Japan

Other features

Memories
23 channels in 1 bank(s)
Usage
Citizen Band (27Mc)
Features + options
Optional 40 channel unit
Accessories
-

Manuals, diagrams and brochures

No documents available for this rig
 
Upload documents or show all Hy-Gain documents
 
Have you spotted an error or can you provide more information? Let us know!

Reviews

Hy-Gain 9

Hy-Gain 9 (2679), Mobile Transceiver

The Hy-Gain 9 is a 40 that’s FOURTY CH Radio AM only Radio It was NOT modified that’s the way it comes from the factory Have many pictures to prove what I’m talking about but your site will not let me post them. This radio has some great Ideas all the controls are on the microphone so if ur stuck for space all you have to mount is a mic clip, I believe it’s a good prototype. Some of the bugs were, mic is huge and of poor quality Speaker in mic not LOUD enough, has plug for ext spk. (needed) Not many were made so MODS/Tuning info is non-existent No parts are avlbl. used odd components so repair is bit of a nightmare. And the up/down switch is backwards. The base or Box that most of the electronics are housed in looks rugged, However the cable that feeds the mic came lose on mine and had to be soldered back in place. The mic connector is very tough also very unique, but it did come with extension cable.

Written by RMY on Mar 7, 2012

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Okay condition in 1978
CAD 0.00

Prices

Estimating the value of a rig can be challenging. The graph below shows historical prices paid by hams over the years. May it guide you to good fortune...

Price Condition Year User
CAD 0.00 Okay / New 1978 RMY
To submit a price, either review the rig or add it to your shack.