Ten-Tec Eagle (599) Desktop HF/VHF Transceiver

  Add a review   View all reviews (1)   Add to my shack

 
 

The Ten-Tec 599 Eagle is a transceiver combining simplified controls and ease of operation with the excellent performance of a low first IF 160-through 6-meter ham-band architecture in a compact, mobile-friendly structure. The analog portion of the radio is double conversion with IF frequencies of 9.0015 MHz and 22.5 kHz. A third conversion to zero-frequency IF is accomplished in the DSP processor.

The Ten-Tec Eagle (599AT) has a built-in antenna tuner.

Frequency range

RX-range
0.5-30 / 50-54 MHz
TX-range
160-10 m + WARC + 6 m
HAM bands
160m  80m  60m  40m  30m (WARC)  20m  17m (WARC)  15m  12m (WARC)  6m  10m 
Stability
± 0.5 p.p.m.
Tuning steps
1 / 10 / 100 Hz / 1 / 10 kHz
Filters
Optional 300, 600, 1k, 1.8k, 6k, 15k

Find the Ten-Tec Eagle (599) on ebay

Receiver

Modulations
AM   FM   CW   USB   LSB   FSK   AFSK  
Sensitivity
SSB: 0.5 µV, 2.4khz, 10dB SINAD
AM: 1.3 µV, 30% Mod, 6kHz BW, 10dB SINAD
FM: 2.2 µV, 5kHz Dev, 16kHz BW, 10dB SINAD
all with preamp off
Selectivity
SSB/CW: 2.4 kHz
AM: 6 kHz
FM: 12 kHz
Receiver system
Double conversion + DSP
IF-frequencies
1st: 9.0015 MHz
2nd: 22.5 kHz
3rd: 0 Hz (DSP)
Image rejection
1st IF: >90dB/HF bands,>70dB/6M 2nd IF: >73dB
Audio output
2W into 4 ohms, <3% THD

Transmitter

Modulations
AM   FM   CW   USB   LSB   FSK   AFSK  
RF-Output
5-100 W (100% duty cycle)

Connections

Antenna
SO-239
Impedance
50Ω

Electrical

Power requirements
13.8V DC ±15%
Current drain RX
1.25 A
TX
20 A

Physical

Dimensions (w×h×d)
216 × 74 × 311 mm (8.50 × 2.91 × 12.24 in) excluding knobs and connectors
Weight
3.30 kg (7.3 lbs) with all options
Form factor
Base Station
Manufactured
Between 2010 and 20xx in USA

Other features

Memories
100 channels in 1 bank(s)
Usage
Amateur / Ham radio operators
Features + options
IF-DSP
CTCSS
USB-connector
Color display
Accessories
-

Manuals, diagrams and brochures

No documents available for this rig

Can you supply additional documents? Please get in touch!
Show more Ten-Tec documents...

Have you spotted an error or can you provide more information? Let us know!

Related

Reviews

Tentec Eagle AT

Ten-Tec Eagle (599), Desktop HF/VHF Transceiver

This is a classic analog radio with first IF at 9MHz using crystal filters and DSP at the 22kHz 2nd IF frequency. TenTec first used the 22kHz IF in their very nice RX320 and the DSP had seen a lot of development by the time the Eagle came out. The circuit boards are good quality. Radio is open and will be easy to work on should it need work. Controls are simple and straight forward. RF gain, AF gain, frequency, A=B and A swap B button makes split operation easy. Pull up the manual for details. http://www.tentec.com Schematics are there too. although the final amplifier in newer models is FET instead of BJT. The FET amp is essentially the same as the Tentec 100W amplifier. I'm told the automatic antenna tuner (AT model) is slow but have nothing to comapare it to. It's maybe 20 to 30 seconds to tune and lets me use my 80m inverted V everywhere except 160, after trimming the open wire feed line a bit. 6m works well. I can hear plenty with the 80m inverted Vee or the homebrew turnstile and work most I can hear. I've used the IC7300 and the Kenwood TS590SG and prefer the controls, size, and most of all audio characteristics of the Eagle. The Eagle has good bandpass filters and holds up much better than the 7300 when the band is full of strong signals. Off frequency RFI that makes the 7300 unusable doesn't phase the Eagle. The Eagle was selling for $2000 with SSB filter and no tuner when I first started looking. When Tentec got sold they blew out the inventory with CW filter, automatic tuner, and noise blanker included for $1500. Close to $1000 off the list price. I could not resist. I would not trade my used Eagle for a brand new 7300 or TS590 even if you kicked in $500. The Eagle is just easier to use and sounds that much better. It's AGC works very well too. If you want a panadapter, the Eagle has a 9MHz IF tap that is buffered. Use it along with a $21 softrock II lite SDR board and a decent sound card with HDSDR software and you can have dual receive and a nice big waterfall display. No radio is perfect. The Eagle has warts. It has fans. I don't like fan noise. Pretty much all radios have fans these days but still...I'd gladly pay $50 more for a big heat sink and no fan. The radio does not have a receive antenna connector. You have to use an external relay or electronic switch if you want to listen on a different antenna then you are transmitting on. 73, -Bob ah7i/w4

Overall
 
Performance
Build quality
Features
User friendlyness
Value for money
Aquired
Mint condition in 2015
USD 1500.00

Prices

Estimating the value of a rig can be challenging. The graph below shows historical prices paid by hams over the years. May it guide you to good fortune...

Price Condition Year User
USD 1799.00 Mint / New 2010 k4rch
USD 1500.00 Mint / New 2015 ajamas.rn
To submit a price, either review the rig or add it to your shack.