Hy-Gain 9 (2679)

    Hy-Gain 9 (2679) - Front view
Type
Mobiel CB Zend/ontvanger 
Frequentiebereik RX
26.965-27.255 MHz 
TX
26.965-27.255 MHz 
Frequentiestabiliteit
Afstemstappen
Filters
455 kHz 
Receiver
Modulaties
AM 
Gevoeligheid
0.7 µV for 10 dB (S+N)/N 
Selectiviteit
Ontvangstsysteem
Dual conversion superheterodyne with RF-amplifier stage and 455 kHz ceramic filter 
IF-frequenties
1st: 10.695 MHz
2nd: 455 kHz 
Spiegelonderdrukking
Audiovermogen
3 W max 
Transmitter
Modulaties
AM 
RF-vermogen
4 W max 
Verbindingen
Antenne
SO-239 
Impedantie
50Ω 
Elektrisch
Vermogensvereisten
11.5~14.5 V DC, negative or positive ground 
Stroomverbruik RX
500 mA in standby (no signal) 
TX
1.3 A @ 13.8 V DC unmodulated 
Fysiek
Afmetingen (w×h×d)
Gewicht
Vormfactor
Mobiel 
Gefabriceerd
Between 1976 and 197x in Japan 
Overige kenmerken
Geheugens
23 channels in 1 banks  
Gebruik
Citizen Band (27MC) 
Fabrikant
Hy-Gain 
Model
9 (2679)
Kenmerken
Optional 40 channel unit 
Handleidingen, diagrammen en brochures
 
Geen beschikbaar  

Prijsgeschiedenis

Estimating the value of a rig, especially an old one, can be challenging. The graph below displays what others have paid for this rig over the years. May it guide you to good fortune...

Beoordelingen

Verberg andere talen
Beoordeeld door
RMY
Beoordelingsdatum
mrt 7th 2012, 18:37
Gekocht
New in 1978
  0.00
Prestaties
2 of 5
Bouwkwaliteit
2 of 5
Kenmerken
3 of 5
Gebruiksvriendelijkheid
2 of 5
Waar voor je geld
4 of 5

Hy-Gain 9

The Hy-Gain 9 is a 40 that’s FOURTY CH Radio AM only Radio
It was NOT modified that’s the way it comes from the factory
Have many pictures to prove what I’m talking about but your site will not let me post them.

This radio has some great Ideas all the controls are on the microphone so if ur stuck for space all you have to mount is a mic clip, I believe it’s a good prototype.

Some of the bugs were,
mic is huge and of poor quality
Speaker in mic not LOUD enough, has plug for ext spk. (needed)
Not many were made so MODS/Tuning info is non-existent
No parts are avlbl. used odd components so repair is bit of a nightmare.
And the up/down switch is backwards.

The base or Box that most of the electronics are housed in looks rugged,
However the cable that feeds the mic came lose on mine and had to be soldered back in place.

The mic connector is very tough also very unique, but it did come with extension cable.

Wilt uw een opmerking plaatsen?
Wordt lid van RigReference (gratis) of log in wanneer u al lid bent