Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 11m (CB) 6m 2m 1.25m 70cm 33cm 23cm 10m 4m | 80m 40m 20m 15m 10m | 2m 70cm |
| Freq. stability | 5 ppm | ? | ± 1.0 ppm (+25°C) |
| Tuning steps | 5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 kHz | ? | 5 / 6.25 / 8.33* / 9* / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 125 / 250 kHz |
Receiver |
|||
| RX-range |
0.1-1300 MHz Cellular blocked in the US |
10-80 m |
0.1–824 / 851–867 / 896–1310 (USA) 0.1–30 / 50.2–51.2 / 87.5–108 / 144–146 / 430–440 / 1240–1300 (France) 0.1–1310 MHz (Other regions) |
| Modulations | AM FM W-FM | CW SSB | AM FM W-FM |
| Sensitivity | ? | ? |
FM (1 kHz/3.5 kHz Dev.; 12 dB SINAD) 1.625–4.995 MHz 0.32 μV typical 5.000–29.995 MHz 0.25 μV typical 30.000–117.995 MHz 0.18 μV typical 118.000–246.995 MHz 0.18 μV typical 247.000–469.995 MHz 0.18 μV typical 470.000–832.995 MHz 0.32 μV typical 833.000–1029.995 MHz 0.28 μV typical 1030.000–1309.995 MHz 0.35 μV typical W-FM (1 kHz/52.5 kHz Dev.; 12 dB SINAD) 76.000–108.000 MHz 1.1 μV typical 175.000–221.995 MHz 1.1 μV typical 470.000–770.000 MHz 1.8 μV typical AM (1 kHz/30% MOD.; 10 dB S/N) 0.495–4.995 MHz 1.3 μV typical 5.000–29.995 MHz 0.89 μV typical 118.000–136.000 MHz 0.63 μV typical 222.000–246.995 MHz 0.63 μV typical 247.000–329.995 MHz 0.79 μV typical |
| Selectivity |
AM/FM: 12 kHz @ -6dB, 30 kHz @ -60 dB W-FM: 150 kHz @ -6dB |
? |
AM/FM More than 12 kHz/–9 dB Less than 30 kHz/–60 dB W-FM More than 150 kHz/–6 dB |
| Filters | ? | ? | ? |
| Receiver system | Triple-conversion Superheterodyne | ? | Triple conversion superheterodyne |
| IF-freqs. |
1st: 248.45 MHz 2nd: 38.85 MHz 3rd: 450 kHz |
? |
1st: 266.7 MHz 2nd: 19.65 MHz (FM/AM), 19.95 MHz (W-FM) 3rd: 450 kHz (FM/AM), 750 kHz (W-FM) |
| Image rejection | ? | ? | ? |
| Audio output | ? | ? | 150mW at 10% distortion, 8 ohms |
Transmitter |
|||
| TX-range | - | 10-80 m | - |
| Modulations | - | CW SSB | - |
| RF-output | ? | 100 W | ? |
Connections |
|||
| Antenna | SMA | - | SMA + Built-in ferrite bar |
| Impedance | 50Ω | 50 Ω | 50Ω |
| Other | - | - | - |
Electrical |
|||
| Power req. | 3.6-4.5V DC internal (3R6) or 4.5-16V DC external | Mains | 4.5-6.3V DC or 2 R6/AA |
| Current RX | 39-150 mA | ? | 30 mA (standby), 130 mA (typical), 140 mA (max) |
| TX | - | ? | - |
Physical |
|||
| Manufactured | Between 2001 and 200x in Japan/Philippines | Between 1959 and 19xx in USA | Between 2010 and 201x in Japan |
| Dimensions |
56 × 102 × 23 mm (2.20 × 4.02 × 0.91 in) |
? |
58 × 86 × 29.8 mm (2.28 × 3.39 × 1.17 in) |
| Weight | 145 gr (5.1 oz) without batteries | ? | 200 gr (7.1 oz) (with supplied antenna and batteries) |
| Form factor | Handheld | Base Station | Handheld |
Other features |
|||
| Memories | 700 channels in 10 bank(s) | ? | 1550 channels in 1 bank(s) @ 100 channels/second |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | Amateur / Ham radio operators |
| Features |
Bug detector Speech descrambler Internal ferrite bar for MW/SW reception W-FM Stereo with headphones |
? |
CTCSS & DTCS PC-programmable via USB Data-cloning Build-in battery charger Rotary frequency dial Ferrite bar antenna for MW Frequency shift for duplex transmissions |
| Accessories | ? | ? | ? |
| MPN | ALINCO-DJ-X000003 | COLLINS-KWM-000002 | ICOM-IC-R000006 |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee