Image wanted

 

Login or Register to upload images

Find Ten-Tec RX-320(D) rigs and spare parts on eBay Find the Ten-Tec RX-320(D) on Amazon
We receive a small fee if you buy through these links, which helps support this site. Thank you!

Computer based receivers have traditionally been about compromise, especially on shortwave (HF). The TEN-TEC RX-320 broke that mold, and the RX-320D goes one step further. The shortwave performance was nothing short of exceptional for the price range. The ergonomics of the graphical interface is also the best we have seen. In other words, it is easy and fun to use! Based on the price it is amazing. Based on the size it is amazing, and if you dare look inside in the cabinet you will scratch your head and say "How did they do that with so few components"? The answer is D.S.P. This is a true Digital Signal Processing based receiver. This cutting edge, software based technology dramatically reduces the number of individual electronic components. The result is you get features only dreamed of in previous receivers in this price range. Enjoy selecting any five filters from 34 built into the radio (25 choices from 1050-8000 Hz and 9 from 300-900 Hz, all with 1.5:1 shape factor or better). A spectrum display function is also supported. Memories store frequency, mode, filter, BFO, name, comments, notes. A local-time, world-time (UTC) clock is continuously displayed.

The RX-320 has a virtual tuning knob. By pointing to the tuning knob on the panel display the radio can be tuned by clicking. Point to the upper half of the knob and a clockwise arrow appears. The receiver tunes up in frequency by the selected step size for each click. Then just point to the lower half of the knob to tune down. The receiver tunes continuously if the left mouse button is held down. The computer's Up and Down arrow keys will also tune the radio. A unique dual S-Meter indication is supported. It shows current and peak signal strength.

This stand-alone, black box PC radio only requires access to a serial port and one megabyte of free hard drive space for the software. It runs on Windows 3.1/95/98/XP/Vista. As with most Windows programs you can launch the PC radio, tune to an interesting station, and then put it in the background while your PC performs other tasks.

The rear panel has a line output jack to drive a computer sound card plus there is an external speaker jack (speaker not supplied). The RX-320 features a telescopic antenna or there is an RCA type antenna jack for an external antenna (recommended). The informative owner's manual is written by noted Joe Carr, and is very easy to understand, even if this is your first shortwave radio.

This new RX-320D model is capable of receiving DRM digital broadcasts with extra software (not supplied) and appropriate PC sound card. The new D model has a 12 kHz I-F output jack on the back panel that allows received signals to be streamed from the I-F directly to your computer's sound card for Digital Radio Mondiale decoding. This special decoding software is available through the DRM consortium via the DRM Software Radio web site located at www.drmrx.org.

Radios shippped after 02/14/08 are USB ready. The software is supplied on a CD rather than diskette and a serial to USB converter is included.

New price in the US: USD 370.- (2008)

General characteristics

HAM bands
?
Frequency stability
?
Tuning steps
0.01 / 0.1 / 1 / 5 / 10 kHz
Memories
100 channels in 1 bank(s)

Receiver

RX-range
0.1-30 MHz
Modulations
All mode  
Sensitivity
0.3 µV CW/SSB 1-30 MHz (10 dB S+N/N)
0.64 µV AM (80% mod @ 1 kHz) 1-30 MHz (12 dB S+N/N)
Selectivity
?
Filters
5 selectable from 34 built in
Receiver system
Digital Signal Processing
IF-frequencies
?
Image rejection
> 60 dB
Audio output
1 Watts at 4 Ohms

Connections

Antenna
RCA (Tulip)
Impedance
50 Ω
Other
-

Electrical

Power requirements
11-13V DC 1.2 A or mains
Current drain RX
?
TX
-

Physical

Dimensions (w×h×d)
159 × 76 × 165 mm (6.26 × 2.99 × 6.50 in)
Weight
1.14 kg (2.5 lbs)
Form factor
Headless
Manufactured
Between 2004 and 200x in USA

Other features

Usage
Amateur / Ham radio operators
Features + options
PBT
DSP
Accessories
-
RigReference ID
4442
MPN
TEN-TEC-RX-000320(D)

Manuals, diagrams and brochures

Tentec Rx320 HF DSP Reciever Scematics AND Parts PDF - 218.7 kB, submitted by Berend
 
Upload relevant documents

Reviews & stories

Do you know this rig? Tell us something about it!

New and second-hand prices

Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used Ten-Tec RX-320(D). Just bought or sold this model? Let us know what you traded it for and help other ham operators!

Based on historic data, today's second-hand price of the Ten-Tec RX-320(D) is around:

  • USD 30.00 ~ USD 26.00

Price History Chart

These estimates are based on the following prices:

Year Historic price Condition Submitted by
2013 USD 339.95 Used / Good universal-radio
2010 USD 189.95 New / Good universal-radio
2010 USD 165.60 Used / Okay eBay

Login or Register to submit prices

Links & tools