Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 2m | 6m 2m | ? |
| Freq. stability | ? | ? | Standard TCXO: below 30 MHz +/- 20 Hz, above 30 MHz +/- 0.5ppm |
| Tuning steps | 5 / 10 / 15 / 25 / 30 kHz | ? | 0.001 kHz |
Receiver |
|||
| RX-range | 143.5-149 MHz | 50-54 / 136-174 MHz | 2MHz - 3.0 GHz |
| Modulations | FM | FM CW SSB | All mode AM N-FM W-FM CW USB LSB ISB |
| Sensitivity |
Better than .5 µV for 20 dB quieting Squelch: Less than .4 µV |
SSB: 0.2 µV (10 dB S+N/N @ 2.4 kHz BW) |
SSB, 10 db S/N: 3 kHz@-117dBm AM (50% mod), 10 db S/N: 6.0 kHz@-108dBm FM-N @ 6 kHz dev, 16 dB SINAD: 15 kHz@-107dBm FM-W @ 10-20 kHz dev, 16 dB SINAD: 30-50 kHz@-102dBm FM-W @ 75kHz dev, 16 dB SINAD: 200 kHz@-96dBm |
| Selectivity |
More than +/- 7.5 kHz at -6 dB Less than +/- 15 kHz at -60 dB |
? |
Selection is mode independent. Approx. 50 filter bandwidths with 8-10 chosen appropriately for each of the 5 modes. Shape factor 1.5:1 or better. (6 to 60 dB). Examples, useful for: CW-100,150,200,250,300, 400, 500, 600, 700, 800, 1000 Hz SSB-1.5, 1.6, 1.7, 1.8, 1.9, 2.0, 2.2, 2.4, 2.6, 3.0, 3.4 kHz AM- 4.0, 5.0, 6.0, 7.0, 8.0, 9.6, 10.4, 12.0, 13.6, 15.2,16kHz WFM-100,120,140,150,160,180, 200, 250, 300 kHz |
| Filters | ? | ? | ? |
| Receiver system | Double Conversion SuperHeterodyne | Triple conversion superheterodyne | ? |
| IF-freqs. |
1st: 10.7 MHz 2nd: 455 kHz |
1st: 45 MHz 2nd: 450 KHz 3rd: 14.5 KHz |
? |
| Image rejection | ? | ? | 80 dB typical 2-3000 MHz |
| Audio output | 325 mW at 8 ohms | ? | Line + Headphones |
Transmitter |
|||
| TX-range | 143.5-149 MHz | 50-54 / 144-148 MHz | - |
| Modulations | FM | FM CW SSB | - |
| RF-output | High: 2.5 W, Low: 0.3 W | 1-20/1-20 W | ? |
Connections |
|||
| Antenna | BNC | SO-239 | SMA |
| Impedance | 50Ω | 50 Ω | 50Ω |
| Other | - | - | - |
Electrical |
|||
| Power req. | 8.4 V DC NiCd | 12-14V DC | 90-264 VAC, 48-440 Hz; optional 11-28V DC power supply |
| Current RX | 25-180 mA | 400 mA (no signal) | 36W |
| TX | 750-375 mA | Max 6 A | - |
Physical |
|||
| Manufactured | Between 1983 and 198x in USA | Between 2000 and 200x | Between 2009 and in USA |
| Dimensions |
169 × 66 × 41 mm (6.65 × 2.60 × 1.61 in) |
216 × 70 × 222 mm (8.50 × 2.76 × 8.74 in) |
190 × 89 × 432 mm (7.48 × 3.50 × 17.01 in) |
| Weight | 496 gr (1.1 lbs) with battery pack | ? | 4.65 kg (10.3 lbs) |
| Form factor | Handheld | Mobile | Base Station |
Other features |
|||
| Memories | 10 channels in 1 bank(s) | 100 channels in 1 bank(s) | 1000 channels in bank(s) @ 100 channels/second |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | Amateur / Ham radio operators |
| Features |
Memory Lock out Selectable Skip (stop 2 sec before resuming scan) or Hold (stop and hold) on busy frequency Modifiable Band Scan Selectable Power Level (300mW / 2.5 W) Quick-Release Battery Pack |
CTCSS encoder. IF-DSP with 35 built-in filters. | ? |
| Accessories | ? | ? | ? |
| MPN | TEN-TEC-002591 | TEN-TEC-000526-(6N2) | TEN-TEC-RX-000400 |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee