Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 11m (CB) 6m 10m | 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 11m (CB) 10m | |
| Freq. stability | ± 0.5 p.p.m. | ±0.3 p.p.m. from –30°C to +60°C | |
| Tuning steps | ? | ? | |
Receiver |
|||
| RX-range | 30 kHz - 60 MHz | 0.250-30 MHz | |
| Modulations | AM FM CW USB LSB RTTY | SSB | |
| Sensitivity |
SSB/CW (10 dB S/N) 1.8-29.999 MHz : -16dBμ (0.16 μV) (1 preamplifier ON) 50 MHz band :-18dBμ (0.13 μV) (2 preamp ON) AM (10dB S/N) 0.5-1.8 MHz : +22 dBμ (12.6 μV) (1 preamplifier ON) 1.8-29.999 MHz : +6 dBμ (2.0 μV) (1 preamplifier ON) 50 MHz band : +4 dBμ (1.6 μV) (2 preamp ON) FM (12dB SINAD) 28.0-29.7 MHz :-6 dBμ (0.50 μV) (1 preamplifier ON) 50 MHz band :-10 dBμ (0.32 μV) |
SSB: -125 dBm (0.12 µV) | |
| Selectivity |
SSB (BW = 2.4kHz) Above 2.4kHz /-6dB Below 3.4kHz /-40dB CW (BW = 500Hz) Above 500Hz /-6dB Below 700Hz /-40dB RTTY (BW = 350Hz) Above 500Hz /-6dB Below 800Hz /-40dB AM (BW = 6kHz) Above 6.0kHz /-6dB Below 10kHz /-40dB FM (BW = 15kHz) 12.0kHz or higher /-6dB Below 22kHz /-40dB |
>65 dB at -1 kHz at -1 kHz +4 kHz SCF (USB) | |
| Filters | 15 kHz (standard) 6 / 3 kHz (optional) (max. three filters total) | 500 Hz, 2.4 kHz, 2.75 kHz, 3 kHz (software defined) | |
| Receiver system | Double conversion + DSP | SDR Processing Architecture | |
| IF-freqs. |
1st: 64.455 MHz 2nd: 36 kHz |
? | |
| Image rejection | > 70 dB | >90 dB | |
| Audio output | 2.0W (8Ω, 10% distortion) | 4.0 W into 4 Ω (external H-250 interface) 0.5 W into 8 Ω (handset) | |
Transmitter |
|||
| TX-range | 160-10 m + WARC / 6 m | 1.6-30 MHz | |
| Modulations | AM FM CW USB LSB RTTY | SSB | |
| RF-output | 100 W (50 W for Japanese version) | 150 W PEP — user programmable Hi, Med, Lo | |
Connections |
|||
| Antenna | SO-239 | N-type | |
| Impedance | 50Ω | 50Ω | |
| Other | - | - | |
Electrical |
|||
| Power req. | 13.8V DC | 10 V to 35 V DC | |
| Current RX | 3 A | 650 mA | |
| TX | 23 A max. | 12 A max | |
Physical |
|||
| Manufactured | Between 2011 and 201x in Japan | Between 201x and 20xx in Australia | |
| Dimensions |
315 × 116 × 343 mm (12.40 × 4.57 × 13.50 in) |
220 × 66 × 190 mm (8.66 × 2.60 × 7.48 in) |
|
| Weight | 10.20 kg (22.5 lbs) excluding optional modules | 3.10 kg (6.8 lbs) RF-unit + handset | |
| Form factor | Base Station | Mobile | |
Other features |
|||
| Memories | 101 channels in 1 bank(s) | 1000 channels in 20 bank(s) @ 8 channels/second | |
| Usage | Amateur / Ham radio operators | Commercial / Land mobile communication | |
| Features |
36 kHz 32-bit IF DSP (the same class as used in the IC-7600) Built-in Auto-AT Built-in RTTY demodulator Integrated speech synthesizer +30 dBm IP3 on HF USB interface for PC control and voice output “Band edge beep alarm” helps users avoid off-band operation Large B/W LCD screen, ergonomically designed controls |
Up to 500 contact list entries IP67 / MIL-STD-810G GPS Data + voice encryption |
|
| Accessories | ? | ? | |
| MPN | ICOM-IC-007410 | CODAN-SENTRY-H | |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee