Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | 2m | 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 11m (CB) 10m | ? |
| Freq. stability | ? | ? | ? |
| Tuning steps | ? | Continuous | ? |
Receiver |
|||
| RX-range | 108-174 / 430-450 MHz | 0.53-30.15 / 88-108 MHz | 0.53-1.605 / 3.9-12 / 87.5-108 MHz |
| Modulations | FM | AM W-FM CW USB LSB | AM W-FM |
| Sensitivity | ? | 0.63 µV (S+N/N=6dB) | ? |
| Selectivity | ? | AM 9.0 kHz, AM-N/SSB 4.0 kHz | ? |
| Filters | ? | - | ? |
| Receiver system | ? | Double conversion superheterodyne | ? |
| IF-freqs. | ? |
1st: 10.7 MHz (SW1) 2nd: 455 kHz (SW2) FM: 10.7 MHz |
? |
| Image rejection | ? | 50-60 dB | ? |
| Audio output | ? | 1 W | ? |
Transmitter |
|||
| TX-range | 144-146 MHz | - | - |
| Modulations | FM | - | - |
| RF-output | High: 2.5-5 W (depending on voltage), Medium: 1 W, Low: 200 mW | - | ? |
Connections |
|||
| Antenna | - | Clamps / screws + Built-in ferrite bar + Built-in sweep | Built-in ferrite bar + Built-in sweep |
| Impedance | 50 Ω | 50-70Ω | ? |
| Other | - | - | - |
Electrical |
|||
| Power req. | 7.2-14V DC | 9 V DC or mains | 6V DC 4R6/AA |
| Current RX | ? | ? | ? |
| TX | ? | - | - |
Physical |
|||
| Manufactured | Between 19xx and 19xx | Between 1978 and 1980 in Japan | Between 1978 and 19xx in Japan |
| Dimensions | ? |
453 × 184 × 227 mm (17.83 × 7.24 × 8.94 in) |
136 × 95 × 41 mm (5.35 × 3.74 × 1.61 in) |
| Weight | ? | 5.40 kg (11.9 lbs) including batteries | 780 gr (1.7 lbs) |
| Form factor | Handheld | Handheld | Handheld |
Other features |
|||
| Memories | ? | None | ? |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | Amateur / Ham radio operators |
| Features | ? | ? | ? |
| Accessories | ? | ? | ? |
| MPN | ALINCO-DJ-G000001E | SONY-ICF-006700W | SONY-ICF-007800W |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee