Compare rigs
Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.
|
|
|
|
|
|---|---|---|---|
General |
|||
| HAM bands | ? | 2m 70cm | |
| Freq. stability | ± 10 x10-6 or better | ± 2.5 p.p.m. | |
| Tuning steps | ? | 12.5 / 25 kHz | |
Receiver |
|||
| RX-range | 0.1-30 MHz (108-174 MHz option: VC-20) | 136-174 / 400-480 / 450-520 MHz | |
| Modulations | AM FM CW USB LSB | FM N-FM | |
| Sensitivity | 0.25 µV 1.8-30 MHz, SSB/CW (S+N/N=10dB) | ≤ 0.20 µV (12 dB SINAD) | |
| Selectivity |
AM: 6.0 kHz SSB/CW: 2.4 kHz FM: 12.0 kHz |
? | |
| Filters | 1st: 58.1125 MHz 2nd: 8.83 MHz 3rd: 455 kHz (FM) | 12.5 / 25 kHz | |
| Receiver system | Triple conversion superheterodyne | ? | |
| IF-freqs. | ? | ? | |
| Image rejection | >80 dB (1.8 - 30 MHz) | ? | |
| Audio output | 1.5 W @ 8 ohm | 500 mW | |
Transmitter |
|||
| TX-range | - | 136-174 / 400-480 / 450-520 MHz | |
| Modulations | - | FM N-FM | |
| RF-output | ? | 10 / 5 / 2 W | |
Connections |
|||
| Antenna | SO-239 + Hi-Z | SMA | |
| Impedance | 50/500 Ω | 50Ω | |
| Other | - | - | |
Electrical |
|||
| Power req. | 13.8V DC or mains | 7.4 V DC, 1500 mAh Li-ion Battery | |
| Current RX | Max 2 A | 100 mA max | |
| TX | - | 1 A max | |
Physical |
|||
| Manufactured | Between 1987 and 1996 in Japan | Between 201x and 201x in China | |
| Dimensions |
270 × 96 × 270 mm (10.63 × 3.78 × 10.63 in) |
135 × 70 × 38 mm (5.31 × 2.76 × 1.50 in) |
|
| Weight | 5.60 kg (12.4 lbs) | 255 gr (9.0 oz) | |
| Form factor | Base Station | Handheld | |
Other features |
|||
| Memories | 100 channels in 1 bank(s) | 16 channels in 1 bank(s) | |
| Usage | Amateur / Ham radio operators | Amateur / Ham radio operators | |
| Features |
AGC Attenuator Carry Handle Dial Lock Dimmer Dual Clock-Timer Dual NB Dual VFOs IF Shift Mute Terminals Notch Record Activation Record Jack S-Meter Scan Squelch Sweep Tilt Bar Tone Control |
CTCSS / DCS DTMF / PTT ID VOX on/off, VOX level setting, VOX delay time setting PC Programmable Wire Clone |
|
| Accessories | ? | ? | |
| MPN | KENWOOD-R-005000 | YANTON-T-000650 | |
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee