The Yaesu FTdx5000 was announced in November 2009. The transceiver features an impressive 112 dB dynamic range and an IP3 (3rd Order Intercept Point) of +40 dBm (CW, 500 Hz). Newly designed roofing filters are selectable between 300 Hz, 600 Hz, 3 kHz, 6 kHz and 15 kHz. DSP features are powered by two 32-bit processors from Texas Instruments (TMS320C6727B) both running at 300 MHz. Each VFO has its own DSP processor. RF output comes from a pair of VRF150 FETS yielding 200 W.
Besides the main display there is a large multi-functional analogue meter (same as in the FTdx-9000) and three sub-displays to indicate sub-frequency, graphical wave and menu functions.
The Station Monitor SM-5000 is included with the FTdx5000D.
Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the current value of the Yaesu FTdx5000D. Just bought or sold this model? Let us know what you traded it for and help other ham operators!
Based on historic data, today's value of the Yaesu FTdx5000D might be around:
This rig is an example of what the manufacturers give us to satisfy our obsession with Rob Sherwood's receiver rankings. No doubt about it, the primary receiver is outstanding. But, the transceivers fails to deliver in many important areas. The QST review noted a CW keying anomaly and stated it was corrected by Yaesu in the second batch of the rig. I had a unit from the 5th batch and found it not only had the problem noted in the review, but many other CW problems as well. The keyed waveform in non-QSK mode showed key clicks due to overshoot on the leading edge. In QSK mode, ALL the dits were shortened, making for an almost unreadable signal. Yaesu supposedly would fix the problem under warranty, but the customer had to pay shipping both ways to get the fix installed for free. The FTDX-5000 is an exceptionally heavy unit and shipping charges to the west coast center were steep. One fellow who had the fix applied by Yaesu then reported that he really couldn't operate QSK above 20 WPM as nothing could be heard between characters in the receiver. The scope in the SM-5000 monitor is terrible, even worse than that in the Orion II and vastly inferior to the scope in any of the Icom rigs going back many years. It's very dim and what's displayed doesn't have much relationship to what's heard. You can forget about being able to visually detect weak signals on the scope. There are MANY rigs out there for much less money that are far superior to the FTDX-5000. This rig was a big disappointment.