ACOM 700S
Amateur Base Station Linear Amplifier
Add a review (+10 rep) Own this rig? Add it to your shack
ACOM 700S: 700 W solid-state HF and 6 m amplifier in ACOM's 1.8-54 MHz S-series.
Drive power: about 27 W for rated output (the usage text says less than 40 W); RF gain 14 dB ±1 dB
IMD3: better than 31 dB below rated PEP; harmonics: better than 60 dB (65 dB typically)
Input SWR below 1.2 (typically 1.1), 1.8-54 MHz; RF bypass SWR below 1.1
Output load SWR: up to 3:1 with proportional power reduction, up to 1.5:1 for full power
Coverage notes: 60 m 5.250-5.450 MHz, 6 m 50-54 MHz; check regional band plans
Operating temperature: -10 to +40 °C; up to 3050 m without output reduction
FCC ID 2AJXZ700S (granted December 2017); CE
General characteristics
- Type
- Linear Amplifier
- HAM bands
- 160m 80m 60m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 6m 10m
- Frequency stability
- ?
- Tuning steps
- ?
- Memories
- ?
Transmitter
- TX-range
- 1.8-54 MHz / 160-6 m
- Modulations
- All mode
- RF-output
- 700 W PEP or continuous carrier (±0.5 dB)
About 450 W below 200 VAC mains (keeps mains current under 16 A)
Connections
- Antenna
- SO-239
- Impedance
- 50Ω
- Other
- -
Electrical
- Power requirements
- 100-240 VAC ±10%, 50-60 Hz, single phase (built-in SMPS, no switch-over) 1350 VA or less at full output, power factor 0.95 or higher Standby under 1 VA
- Current drain RX
- ?
- TX
- ?
Physical
- Dimensions (w×h×d)
- 326 × 155 × 388 mm (12.83 × 6.10 × 15.28 in) Operating, excluding cables and opened tilt foot bar
- Weight
- 11.60 kg (25.6 lbs) Operating, excluding cables and opened tilt foot bar
- Form factor
- Base Station
- Manufactured
- Between 20xx and 20xx
Other features
- Usage
- Amateur / Ham radio operators
- Features + options
- Solid-state LDMOS linear amplifier, 160-6 m
700 W PEP or continuous carrier
5" colour display (800x480) and six front-panel buttons
Automatic band switching via CAT or built-in frequency counter
Broadband input, SWR below 1.2, no retuning
Built-in PFC switching power supply, 100-240 VAC
RS-232 port; ACOM eBox (optional) for Internet remote control
Fault log: 55 parameters for each of the last 28 trips - Accessories
- -
- RigReference ID
- 6872
- MPN
- ACOM-000700S
Manuals, diagrams and brochures
-
No manuals yet for the ACOM 700S. Have a PDF of the user manual, service manual, or schematic? Upload it and help the next operator.
- Upload relevant documents
Reviews
Be the first to review the ACOM 700S
No reviews yet. Share your experience and earn +10 reputation.
Write the first reviewNew and second-hand prices
Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used ACOM 700S. Just bought or sold this model? Let us know what you traded it for and help other ham operators!
Based on similar Linear Amplifier equipment, the estimated value of the ACOM 700S is around:
- USD 462 ~ USD 858
This estimate is based on similar equipment and may not reflect the exact value of this model.
These estimates are based on the following prices:
Links & tools
- Search YouTube for ACOM 700S videos
- Search Google for ACOM 700S information
- Search Google Images for ACOM 700S
- Search Wikipedia for ACOM 700S information
- Search the Boat Anchor Manual Archive (BAMA) for ACOM 700S for manuals and documents (using Google)
- Search eHam for ACOM 700S reviews (using Google)
- Search mods.dk for ACOM 700S mods and repairs
-
Find the ACOM 700S on Amazon
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee