Compare rigs

Compare specifications between amateur radios. Simply select up to 3 radios and compare them side-by-side, including images and descriptions.

Mobile HF transceiver

General

HAM bands ?
Freq. stability ±0.3 p.p.m. from –30°C to +60°C
Tuning steps ?

Receiver

RX-range 0.250-30 MHz
Modulations AM   CW   USB   LSB   FSK   AFSK  
Sensitivity 0.12 µV, –125 dBm for 10 dB SINAD
Selectivity >70 dB at –1 kHz and +4 kHz ref SCF USB
Filters 2.4 kHz standard (500 Hz, 2.7 kHz optional)
Receiver system SDR Processing Architecture: DSP, 456 MHz, 32-bit FPGA, 500,000 gate MCU, ARM9, 300 MHz 32-bit
IF-freqs. ?
Image rejection >70 dB
Audio output Less than 3 dB variation from 300 Hz to 3 kHz (with optional 2.7 kHz filter)

Transmitter

TX-range 1.6-30 MHz
Modulations AM   CW   USB   LSB   FSK   AFSK  
RF-output 125 W PEP ±1 dB (two-tone or voice), user-programmable (low / medium / high)

Connections

Antenna SO-239
Impedance 50Ω
Other -

Electrical

Power req. 10.8 to 15 V DC (12 V Nominal)
Current RX 500 mA (backlight min, audio muted)
TX 12.5 A max

Physical

Manufactured Between 201x and 20xx in Australia
Dimensions 210 × 270 × 65 mm
(8.27 × 10.63 × 2.56 in)
Weight 3.10 kg (6.8 lbs) RF-unit + handset
Form factor Mobile

Other features

Memories 1000 channels in 20 bank(s)
Usage Commercial / Land mobile communication
Features Up to 500 contact list entries
USB (via Handset or Console)
Serial RS232 (supports NMEA-0183 GPS)
Ethernet (TCP/IP, supports remote control)
Auxiliary GPIO (audio in/out, PTT, RS232) on Envoy™ X2 model
Ingress Protection: IP43, MIL-STD-810G method 510.5
Accessories ?
MPN CODRADI013