Login or Register to upload images

Find Belfone BF-7110 rigs and spare parts on eBay Find the Belfone BF-7110 on Amazon
We receive a small fee if you buy through these links, which helps support this site. Thank you!

BelFone BF-7110 is an analog radio with long talk range. It comes with a tensile antenna to further extend the coverage. The user can switch between 7 watt high power and 1 watt low transmitting power.

* VOX

This function helps you to enjoy the hand-free operation. You can initiate transmission with your voice while your hands are doing more important things. Paired earpieces are required for VOX.


* Squelch Levels (0-9)

This feature helps to reduce background noise and deliver a clearer audio. The user can set the squelch level according to his communication needs.


* Channel Announcement

When the user is switching channels with the channel knob, the radio announces the current channel number. The user can choose from Chinese and English announcements. It can be turned off if not needed.


* TOT (Timeout Timer)

This can effectively prevent a channel from being unnecessarily occupied by mis-operation. The user can set a timeout for each transmission. When the time is out, the transmitting will automatically stop and a warning tone will go off.


* Scan

This enables the user to monitor all the radio communications on the preset channels. The user can stop at any channel he wants. BF-7110 scans only preset channels.


* High/low Power Switchable

The user can switch between 7W high and 1W low transmitting. This makes BF-7110 more flexible and can extend the battery standby time when high power is not needed.


* Programmable Bandwidth

BF-7110 supports both wide (25kHz) and narrow (12.5kHz) bands. The user can set the bandwidth via the PC programming software according to his communication needs.


* Busy Channel Lockout (BCL)

When activated, this feature prevents the radio from receiving unauthorized signals or transmitting signals to busy channels. So channels can be kept from unnecessary interference.


* QT/DQT

The user can only receive signals programmed with the same QT/DQT code, which can effectively keep off unwanted signals.


* Low Battery Alert

When the user turns on BF-7110, the radio will automatically run a battery check. When the voltage is lower than 3.3V, the LED will flash red and a warning tone will go off every other ten seconds. The user will find the radio unable to transmit. The battery needs to be recharged A.S.A.P.


* Monitor

The user can use this feature to pick up weak signals on a channel. When there is no radio signals on the current channel, the user can adjust the radio volume according to the volume of the background noise.

General characteristics

HAM bands
70cm 
Frequency stability
±2.5ppm
Tuning steps
?
Memories
?

Receiver

RX-range
400-470MHz
Modulations
-
Sensitivity
≤-123dB(12dB SINAD)
Selectivity
≥60dB(width)/ 55dB(narrow)
Filters
?
Receiver system
?
IF-frequencies
?
Image rejection
?
Audio output
500 mW

Transmitter

TX-range
400-470MHz
Modulations
-
RF-output
?

Connections

Antenna
-
Impedance
50ΩΩ
Other
-

Electrical

Power requirements
?
Current drain RX
?
TX
?

Physical

Dimensions (w×h×d)
61 × 37 × 132 mm (2.40 × 1.46 × 5.20 in)
Weight
242 gr (8.5 oz) including battery pack
Form factor
Portable
Manufactured
Between 20xx and 20xx in China

Other features

Usage
Commercial / Land mobile communication
Features + options
Switchable Power
Squelch Levels(0-9)
Time-out Timer(TOT)
Channel Prompt
QT/DQT
Low Battery Alert
BCL
VOX
Accessories
Antenna
Battery
Charger
Belt Clip
Hand Strap
RigReference ID
6618
MPN
BELFONE-BF-007110

Manuals, diagrams and brochures

BelFone Analog Two-way Radio BF-7110 Brochure PDF - 7.63 MB, submitted by belfone
 
Upload relevant documents

Reviews & stories

Do you know this rig? Tell us something about it!

New and second-hand prices

Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used Belfone BF-7110. Just bought or sold this model? Let us know what you traded it for and help other ham operators!

These estimates are based on the following prices:

Year Historic price Condition Submitted by

Login or Register to submit prices

Links & tools