Login or Register to upload images

Compact portable QRP SDR transceiver for the HF bands, designed by PrTrx (csqwdy) and sold assembled by HamGeek as the HamGeek PT1. Parts of the hardware and software design derive from VK7IAN's open-source MBPTRX, used under VK7IAN's permission. The hardware is open source; the firmware is closed source and needs a free registration code for self-built units.
Output power: 5 W is the standard rating; the designer advises not to exceed 5 W in FT8 without extra cooling, while 10 W is fine for normal QSOs. IMD3 better than -35 dBc at 10 W PEP (measured -38 dBc).
Operating modes: LSB, USB, CWL, CWU, DGL, DGU, AM, NFM
Sideband suppression: better than -50 dBc; carrier suppression: better than -50 dBc
Spurious emissions: better than -50 dBc (2nd and 3rd harmonics)
Antenna impedance: 50 ohm; microphone impedance: 2 kohm
Operating temperature: 0 to +50 °C
SWR cannot be measured accurately below about 2 W.

General characteristics

Type
Transceiver
HAM bands
80m  40m  30m (WARC)  20m  17m (WARC)  15m  12m (WARC)  10m 
Frequency stability
±1 ppm (after 30 min warm-up)
Tuning steps
10 / 100 Hz, 1 / 10 / 100 kHz
Memories
?

Receiver

RX-range
3.5-30 MHz
Modulations
AM   N-FM   CW   USB   LSB  
Sensitivity
SSB/CW: <0.20 µV (-121 dBm) at 2.4 kHz / 500 Hz BW
AM: <0.4 µV (-115 dBm) at 6 kHz BW
NFM: <0.4 µV (-115 dBm)
MDS: <0.035 µV (-136 dBm) at 500 Hz CW BW
Selectivity
SSB: 2 / 2.2 / 2.4 / 2.6 / 2.8 kHz
CW: 50 / 100 / 200 / 300 / 500 Hz
AM: 6 / 10 kHz
FM: 11 kHz
Filters
?
Receiver system
?
IF-frequencies
?
Image rejection
?
Audio output
1 W at 8 ohm, 2 W at 4 ohm (≤10% THD)

Transmitter

TX-range
3.5-3.9 MHz
7-7.2 MHz
10.1-10.15 MHz
14-14.35 MHz
18.068-18.168 MHz
21-21.45 MHz
24.89-24.99 MHz
28-29.7 MHz
Modulations
AM   N-FM   CW   USB   LSB  
RF-output
0.1-5 W ±1 dB, continuously adjustable
Up to 10 W ±1 dB with enhanced cooling

Connections

Antenna
-
Impedance
?
Other
-

Electrical

Power requirements
11-15 V DC (13.8 V typical) RX: ≤280 mA at minimum volume TX: ≤2.5 A at 10 W
Current drain RX
?
TX
?

Physical

Dimensions (w×h×d)
116 × 87 × 48 mm (4.57 × 3.43 × 1.89 in) L x W x H as published, excluding protrusions
Weight
380 gr (13.4 oz) Main unit only (approx.)
Form factor
Portable
Manufactured
Between 2026 and 20xx

Other features

Usage
Amateur / Ham radio operators
Features + options
Portable QRP HF SDR transceiver, QSD/QSE zero-IF architecture
Raspberry Pi Pico 2 (RP2350) controller, 24-bit codec
2.0" 320x240 colour IPS display
28 kHz spectrum and waterfall
TX on all ham bands 3.5-29.7 MHz, general coverage RX 3.5-30 MHz
SSB, CW, AM, NFM and data modes
JNR digital noise reduction, noise blanker, notch
0.1-5 W, up to 10 W with extra cooling
Computer connectivity and control
Open-source hardware
Accessories
Supplied: handheld microphone, power cable, user manual
RigReference ID
6858
MPN
PRTRX-PT000001

Manuals, diagrams and brochures

No manuals yet for the PrTrx PT1. Have a PDF of the user manual, service manual, or schematic? Upload it and help the next operator.
 
Upload relevant documents

Reviews

Be the first to review the PrTrx PT1

No reviews yet. Share your experience and earn +10 reputation.

Write the first review

New and second-hand prices

Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used PrTrx PT1. Just bought or sold this model? Let us know what you traded it for and help other ham operators!

Based on similar Transceiver equipment, the estimated value of the PrTrx PT1 is around:

  • USD 197 ~ USD 365

This estimate is based on similar equipment and may not reflect the exact value of this model.

These estimates are based on the following prices:

Year Historic price Condition Submitted by

Login or Register to submit prices

Links & tools

Compare (0/4)
    Compare now