Login or Register to upload images

ANAN-G2-1K: one-box 1000 W+ SDR transceiver from Apache Labs, with the SDR and 1 kW power amplifier designed together in a single enclosure, so no external linear and no extra RF, ALC, CAT or amplifier keying cables are needed.
Architecture: direct-sampling DDC/DUC; microprocessor-controlled protection for SWR, temperature and voltage/current (over or under); frequency resolution 1 Hz; TCXO stability typically ±0.1 ppm; clock phase noise -149 dB at 10 kHz
Receiver: direct down conversion; independent filter banks for each ADC; 10 m / 6 m LNAs; 1-30 dB step attenuator; reciprocal mixing dynamic range 116 dB at 2 kHz; image rejection 100 dB
Transmitter: direct up conversion, 16-bit DAC; IMD3 typically -62 dB at 1000 W PEP on 20 m; harmonics typically better than -50 dBc on HF and -60 dBc on 6 m; carrier and opposite-sideband suppression better than -80 dBc; transverter IF output 0 to 15 dB
I/O: RCA line in, digital in, PTT in and out, DB9 with seven software-configurable open-collector outputs, SMA transverter output, 10 MHz reference input, 6.25 mm barrel microphone, CW key, headphone and speaker outputs, RJ45 Ethernet, 2 x HDMI, 2 x USB
The product page lists a booking (preorder) with shipping stated as end of August / early September 2026

General characteristics

Type
Transceiver
HAM bands
160m  80m  40m  30m (WARC)  20m  17m (WARC)  15m  12m (WARC)  6m  10m 
Frequency stability
?
Tuning steps
?
Memories
?

Receiver

RX-range
0.009-60 MHz
Modulations
Multiple (Software defined)  
Sensitivity
?
Selectivity
?
Filters
?
Receiver system
?
IF-frequencies
?
Image rejection
?
Audio output
?

Transmitter

TX-range
160-6 m amateur bands
Modulations
Multiple (Software defined)  
RF-output
1000 W PEP SSB/CW; 500 W FM, RTTY, digital; 275 W AM; on 6 m 400 W SSB/CW and 200 W FM, RTTY, digital

Connections

Antenna
SO-239 + SMA + RCA (Tulip)
Impedance
50Ω
Other
-

Electrical

Power requirements
48-53.5 V DC, 40 A
Current drain RX
?
TX
?

Physical

Dimensions (w×h×d)
384 × 138 × 497 mm (15.12 × 5.43 × 19.57 in) Not including extrusions
Weight
15.00 kg (33.1 lbs) Approx.
Form factor
Base Station
Manufactured
Between 20xx and 20xx

Other features

Usage
Amateur / Ham radio operators
Features + options
One-box 1000 W+ HF and 6 m direct-sampling SDR transceiver with integrated PA
Dual 16-bit phase-synchronous ADCs, 9 kHz-60 MHz receive
Hardware support for 7 independent receivers
Centralised protection: temperature, current, SWR, reflected power, drive
Integrated predistortion with optimised exciter-to-amplifier chain
Ethernet, 2 x HDMI, 2 x USB
SO-239 antenna port, 10 MHz reference input, SMA transverter output
Accessories
-
RigReference ID
6875
MPN
APACHE-LABS-ANAN-G000002-1K

Manuals, diagrams and brochures

No manuals yet for the Apache Labs ANAN-G2-1K. Have a PDF of the user manual, service manual, or schematic? Upload it and help the next operator.
 
Upload relevant documents

Reviews

Be the first to review the Apache Labs ANAN-G2-1K

No reviews yet. Share your experience and earn +10 reputation.

Write the first review

New and second-hand prices

Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used Apache Labs ANAN-G2-1K. Just bought or sold this model? Let us know what you traded it for and help other ham operators!

Based on similar Transceiver equipment, the estimated value of the Apache Labs ANAN-G2-1K is around:

  • USD 197 ~ USD 366

This estimate is based on similar equipment and may not reflect the exact value of this model.

These estimates are based on the following prices:

Year Historic price Condition Submitted by

Login or Register to submit prices

Links & tools

Compare (0/4)
    Compare now