Login or Register to upload images

ANAN-G2 Ultra: the front-panel version of the Apache Labs G2 SDR. Apache Labs states that the earlier G2 display model was upgraded to the Ultra with a higher-resolution display, a front panel with more knobs, buttons and LED indicators, an ergonomic control layout, and a CNC-machined aluminium front panel; front-panel control from Thetis on a PC is announced as a future capability.
Architecture: direct-sampling DDC/DUC; frequency resolution 1 Hz; TCXO stability typically ±0.1 ppm; clock phase noise -149 dB at 10 kHz; interfaces Ethernet and internal PCIe
Processing: large FPGA rated 930 GMAC/s with an on-board quad-core SoC; 10 DDCs; stand-alone operation without a PC, or with Thetis on a PC; remote operation is hardware-ready with remote clients announced for iPad, iPhone, Android, Windows and Mac; PureSignal and diversity reception supported
Receiver: direct down conversion; dual 16-bit phase-synchronous ADCs with independent filter banks; 6 m LNAs; 1-30 dB step attenuator; reciprocal mixing dynamic range 116 dB at 2 kHz offset; image rejection 90 dB; hardware support for 10 independent receivers assignable to either ADC
Transmitter: direct up conversion, 16-bit DAC; IMD3 typically -68 dB below PEP at 100 W on 20 m; harmonics typically better than -43 dBc on HF and -60 dBc on 6 m; carrier and opposite-sideband suppression better than -80 dBc; transverter IF output 0 to 15 dB
Antenna ports: three software-configurable 50 ohm BNC, three BNC for ADC1 bypass and loop-in, one BNC for RX2
I/O: audio barrel line in, digital inputs, PTT in and out, DB9 with seven software-configurable open-collector outputs, SMA transverter output, 10 MHz reference input, 3.25 mm barrel microphone (as published), CW key, headphone and two powered speaker outputs, mini-XLR microphone input with preamp, RJ45 Ethernet, 2 x HDMI 4K video outputs
Supply: 13.8 V DC, 2.5 A receive / 25 A transmit
The page text gives the display size as 8 inch in the upgrade list and as a 7-inch touch panel in the I/O list
The page compares the G2 with the ANAN-7000DLE/8000DLE MkII (240 GMAC/s, 8 DDCs, no stand-alone mode, no built-in CPU)
The page lists it as a preorder (order charged when ready to ship, about 2 weeks lead time)
See also Apache Labs ANAN-G2.

General characteristics

Type
Transceiver
HAM bands
160m  80m  40m  30m (WARC)  20m  17m (WARC)  15m  12m (WARC)  6m  10m 
Frequency stability
?
Tuning steps
?
Memories
?

Receiver

RX-range
0.009-60 MHz
Modulations
Multiple (Software defined)  
Sensitivity
?
Selectivity
?
Filters
?
Receiver system
?
IF-frequencies
?
Image rejection
?
Audio output
?

Transmitter

TX-range
160-6 m amateur bands
Modulations
Multiple (Software defined)  
RF-output
100 W PEP SSB, FM, RTTY, digital; 100 W CW; 1-30 W AM

Connections

Antenna
BNC + SMA + RCA (Tulip)
Impedance
50Ω
Other
-

Electrical

Power requirements
13.8 V DC, 25 A (2.5 A receive, 25 A transmit)
Current drain RX
?
TX
?

Physical

Dimensions (w×h×d)
314 × 138 × 368 mm (12.36 × 5.43 × 14.49 in) Not including extrusions
Weight
7.50 kg (16.5 lbs) Approx.
Form factor
Base Station
Manufactured
Between 20xx and 20xx

Other features

Usage
Amateur / Ham radio operators
Features + options
100 W HF and 6 m stand-alone SDR transceiver, 9 kHz-60 MHz receive
Large colour display with CNC-machined aluminium front panel, knobs, buttons and LED indicators
Dual 16-bit ADCs, 10 receivers, 930 GMAC/s FPGA with quad-core SoC
Works stand-alone or with Thetis on a PC
PureSignal, diversity reception, neural noise reduction
Mini-XLR balanced microphone input with preamp
2 x HDMI 4K, Gigabit Ethernet, 3 x USB
Accessories
-
RigReference ID
6876
MPN
APACHE-LABS-ANAN-G000002-ULTRA

Manuals, diagrams and brochures

No manuals yet for the Apache Labs ANAN-G2 Ultra. Have a PDF of the user manual, service manual, or schematic? Upload it and help the next operator.
 
Upload relevant documents

Reviews

Be the first to review the Apache Labs ANAN-G2 Ultra

No reviews yet. Share your experience and earn +10 reputation.

Write the first review

New and second-hand prices

Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used Apache Labs ANAN-G2 Ultra. Just bought or sold this model? Let us know what you traded it for and help other ham operators!

Based on historic price data, today's estimated value of the Apache Labs ANAN-G2 Ultra in Good condition is around:

  • USD 3,633

Price History Chart

These estimates are based on the following prices:

Year Historic price Condition Submitted by
2026 USD 4495.00 New / Mint RigReference

Login or Register to submit prices

Links & tools

Compare (0/4)
    Compare now