ACOM 1000
Amateur Base Station Linear Amplifier
Add a review (+10 rep) Own this rig? Add it to your shack
ACOM 1000: 1000 W tube amplifier for 160-6 m with OLED display and TRI tuning aid.
Drive power: 50-60 W for rated output (the usage text says less than 60 W, and that 60 W RF drive is sufficient); RF gain 12.5 dB typically, response flat within 1 dB
Tube: from 1 January 2024 a single 4CX800A (800 W plate dissipation, forced air); until the end of 2023 a Svetlana GU74B (4CX800A)
IMD: better than 35 dB below rated output; harmonics: better than 50 dB (1.8-29.7 MHz), 66 dB (50-54 MHz)
Input SWR below 1.3:1, 1.8-54 MHz; bypass SWR below 1.1:1
Withstands up to 300 W reflected power; fault signatures of the last 7 protection trips stored
Coverage: the current official product-page band list is 160, 80, 40, 30, 20, 17, 15, 12, 10 and 6 m; 60 m is not listed. The August 2021 user manual says "all amateur bands in the 1.8-54 MHz frequency range" without a band-by-band list and does not mention 60 m.
The August 2021 user manual requires the external auxiliary fan for continuous-carrier transmissions longer than 15 minutes; the current product page does not repeat this.
FCC ID OITAA1000 (granted December 2000); CE
General characteristics
- Type
- Linear Amplifier
- HAM bands
- 160m 80m 40m 30m (WARC) 20m 17m (WARC) 15m 12m (WARC) 6m 10m
- Frequency stability
- ?
- Tuning steps
- ?
- Memories
- ?
Transmitter
- TX-range
- 1.8-54 MHz / 160-6 m
- Modulations
- All mode
- RF-output
- 1000 W PEP or continuous carrier (±0.5 dB), no mode limit, over both mains ranges
Connections
- Antenna
- SO-239
- Impedance
- 50Ω
- Other
- -
Electrical
- Power requirements
- 85-132 VAC / 170-264 VAC (taps for 100, 110, 120, 200, 210, 220, 230, 240 V nominal, +10% -15%), 50-60 Hz, single phase 2200 VA at rated output
- Current drain RX
- ?
- TX
- ?
Physical
- Dimensions (w×h×d)
- 422 × 195 × 355 mm (16.61 × 7.68 × 13.98 in) Operating, excluding cables
- Weight
- 22.00 kg (48.5 lbs) Operating, excluding cables
- Form factor
- Base Station
- Manufactured
- Between 20xx and 20xx
Other features
- Usage
- Amateur / Ham radio operators
- Features + options
- Tube linear amplifier, 160-6 m (single 4CX800A tetrode since 2024)
1000 W PEP or continuous carrier, 50-60 W drive
TRI (True Resistance Indicator) and automatic input attenuator for fast tuning
AUTO-OPERATE mode
OLED status display, 12 parameters monitored
Output RF arc protection
No antenna tuner needed up to SWR 3:1
Bias optimizer; 8 selectable mains taps - Accessories
- -
- RigReference ID
- 6863
- MPN
- ACOM-001000
Manuals, diagrams and brochures
-
No manuals yet for the ACOM 1000. Have a PDF of the user manual, service manual, or schematic? Upload it and help the next operator.
- Upload relevant documents
Reviews
Be the first to review the ACOM 1000
No reviews yet. Share your experience and earn +10 reputation.
Write the first reviewNew and second-hand prices
Estimating the value of a rig can be challenging. We collect prices paid by real hams over the years to help you estimate the value of a used ACOM 1000. Just bought or sold this model? Let us know what you traded it for and help other ham operators!
Based on similar Linear Amplifier equipment, the estimated value of the ACOM 1000 is around:
- USD 462 ~ USD 858
This estimate is based on similar equipment and may not reflect the exact value of this model.
These estimates are based on the following prices:
Links & tools
- Search YouTube for ACOM 1000 videos
- Search Google for ACOM 1000 information
- Search Google Images for ACOM 1000
- Search Wikipedia for ACOM 1000 information
- Search the Boat Anchor Manual Archive (BAMA) for ACOM 1000 for manuals and documents (using Google)
- Search eHam for ACOM 1000 reviews (using Google)
- Search mods.dk for ACOM 1000 mods and repairs
-
Find the ACOM 1000 on Amazon
About
RigReference.com aims to become the most comprehensive reference guide for ham radio equipment. If you have any questions or suggestions, or if you'd like to participate, please get in touch.
Buy me a coffee